Description

Atlas EnergyShield PanelCast Tri-Lam is a rigid closed-cell polyisocyanurate insulation board bonded to multiplex facers comprised of tri-laminate layers of foil, kraft, and polyiso designed for use with concrete walls and poly with no exposed metal designed for use in concrete sandwich panel walls only

THERMAL VALUE

R-VALUE1,2 NOMINAL BOARD THICKNESS3
6.5 1.0″
9.8 1.5″
13.1 2.0″
16.0 2.5″
19.7 3.0″
22.2 3.5″
26.0 4.0″

1Thermal values were determined by ASTM C518 Test Method at 75°F mean temperature using materials conditioned in accordance with ASTM C1289.
2“R” means resistance to heat flow. The higher the R-value, the greater the insulating power.
3Additional sizes available upon request. EnergyShield PanelCast is shipped on standard 48ʹ truck with 24 packages per load. Truckload quantities may vary when mixed.

APPLICATIONS

EnergyShield PanelCast Tri-Lam is recommended for use in insulated concrete panels, forms and tilt-up walls in commercial and residential construction applications, check local building codes for compliance. EnergyShield PanelCast Tri-Lam is designed for use with concrete walls ONLY where boards are sandwiched between two layers of concrete with connectors holding together the finished panel.

PROPERTIES

PROPERTY TEST METHOD TEST METHOD MINIMUM REQUIREMENTS
COMPRESSIVE STRENGTH ASTM D1621 25 psi
FLAME SPREAD, Core ASTM E84 /UL 723 ≤ 75
SMOKE DEVELOPED, Core ASTM E84 /UL 723 ≤ 450
WATER VAPOR TRANSMISSION, METHOD A ASTM E96 ≤ 0.1 Perm
WATER ABSORPTION ASTM C209 < 1% by Volume
DIMENSIONAL STABILITY, LENGTH & WIDTH ASTM D2126 ≤ 1% Linear Change
SERVICE TEMPERATURES – -100°F to +250°F
(-73°C to 122°C)

Technical and physical properties listed are representative of typical values based on testing and are intended as general guidelines only and subject to manufacturing tolerances.
No warranties are given except for those specifically written by Atlas for its products.

COMPLIANCES